I know, wrong forum to ask this question...I'd go to the other one, but she won't let me in!!
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Metal flake paint match? http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=4508 |
Page 1 of 1 |
| Author: | L. Presnall [ Fri Jan 13, 2006 5:44 am ] |
| Post subject: | |
I did a church girl a favor and repaired the lower bout of a Peavey electric bass...it had been dropped and I glued the piece back with CA and scraped the area level and buffed it out...in the process some of the metallic flake paint was removed...any idea where I can get something to match? The color is kind of a gray/green/black/charcoal sort of thing...if I can get Peavey to help I'll go that route, but still waiting to hear...besides, I'm sure it's an offshore product and I have no idea what the support will be.... |
|
| Author: | L. Presnall [ Fri Jan 13, 2006 7:29 am ] |
| Post subject: | |
I know, wrong forum to ask this question...I'd go to the other one, but she won't let me in!!
|
|
| Author: | DaleH [ Fri Jan 13, 2006 1:33 pm ] |
| Post subject: | |
I had about the same thing and ended up at a custom body shop. The guy was pretty cool, he set me up with a close match and after a couple of coats of ktm over it you’d have to look pretty hard to see it. |
|
| Author: | L. Presnall [ Fri Jan 13, 2006 3:39 pm ] |
| Post subject: | |
Thanks Dale! I'll give it a try! |
|
| Author: | MLAnderson [ Fri Jan 13, 2006 11:47 pm ] |
| Post subject: | |
Look at Guitar Reranch. They mostly have Fender colors but since everyone tries to look like fender the color might be close. Mark |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|